RedMax BCZ350S Operator's Manual download pdf (Page 21)

US-19

BCZ350S

6. Starting and stopping

Choke: Set the choke control in the choke position.

• When the engine is started with the choke in either the

choke or start throttle positions the cutting attachment will

start to rotate immediately.

Hold the body of the machine on the ground using your left hand

(CAUTION! Not with your foot!). Grip the starter handle, slowly

pull out the cord with your right hand until you feel some esistance

(the starter pawls grip), now quickly and powerfully pull the cord.

Never twist the starter cord around your hand.

Repeat pulling the cord until the engine starts. When the engine

starts. return choke control to run position and apply full throttle;

the throttle will automatically disengage from the start setting.

CAUTION! Do not pull the starter cord all the way out and do not

let go of the starter handle when the cord is fully extended. This

can damage the machine.

WARNING

CAUTION! Do not put any part of your body in marked area.

Contact can result in burns to the skin, or electrical shock if the

spark plug cap has been damaged. Always use gloves. Do not

use a machine with damaged spark plug cap.

Stopping

Stop the engine by switching off the ignition.

CAUTION! The stop switch automatically returns to the start

position. In order to prevent unintentional starting, the spark plug

cap must be removed from the spark plug when assembling,

checking and/or performing maintenance.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 119 120

No comments

RedMax BCZ350S Operator's Manual Page 21