RedMax BCZ350S Operator's Manual download pdf (Page 13)

US-11

BCZ350S

3. For safe operation

6. Locking nut

A locking nut is used to secure some types of cutting

attachment.

When fitting, tighten the nut in the opposite direction to the

direction of rotation of the cutting attachment. To remove it,

undo the nut in the same direction as the cutting attachment

rotates. (CAUTION! The nut has a left-hand thread.) Tighten

the nut using the socket spanner.

The nylon lining inside the locking nut must not be so worn that

you can turn it by hand. The lining should offer a resistance of

at least 1.5 Nm. The nut should be replaced after it has been

put on approx. 10 times.

■ Cutting equipment

This section describes how to choose and maintain your

cutting equipment in order to:

• Reduce the risk of blade thrust.

• Obtain maximum cutting performance.

• Extend the life of cutting equipment.

Only use cutting attachments with the guards we recommend!

See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the

correct way to load the cord and the correct cord diameter.

Keep the teeth of the blade correctly sharpened! Follow our

recommendations. Also refer to the instructions on the blade

packaging.

•Always stop the engine before doing any work on the

cutting attachment. This continues to rotate even after the

throttle has been released.

WARNING

IMPORTANT

• Ensure that the cutting attachment has stopped completely

and disconnect the HT lead from the spark plug before you

start to work on it.

• Using an incorrect cutting attachment or an incorrectly

sharpened blade increases the risk of blade thrust.

1. Cutting equipment

Grass blades and grass cutters are intended for cutting coarse

grass.

A trimmer head is intended for trimming grass.

General rules

Only use cutting attachments with the guards we recommend!

See the chapter on Technical data.

Keep the teeth of the blade correctly sharpened! Follow our

instructions and use the recommended file gauge. An

incorrectly sharpened or damaged blade increases the risk of

accidents.

Check the cutting attachment for damage or cracks. A

damaged cutting attachment should always be replaced.

2. Sharpening grass cutters and grass blades

• See the cutting attachment packaging for correct sharpening

WARNING

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 119 120

Comments to this Manuals

No comments

RedMax BCZ350S Operator's Manual Page 13

Comments to this Manuals

Related products and manuals for Grass trimmers RedMax BCZ350S