Redmax HBZ2601 User Manual download pdf (Page 36)

9. Maintenance

English

■ AIR INLET SCREEN

• Blowing air is taken in from the air inlet screen.

When air flow has dropped down during operation,

stop the engine and inspect the air inlet screen for

blocking by obstacles.

• Note that failure to remove any such obstacles may

result in the engine becoming overheated and

damaged.

Never use the blower without the screen at the air

intake of the blower. Before each use, check that,

the screw (1) is securely tightened and is free from

any damage.

(1) Screw

(2) Air inlet screen

■ PROCEDURES TO BE PERFORMED AFTER

EVERY 100 HOURS OF USE

• Remove the muffler, insert a screwdriver into the

vent, and wipe away any carbon buildup. Wipe away

any carbon buildup on the muffler exhaust vent and

cylinder exhaust port at the same time.

• Tighten all screws, bolts, and fittings.

WARNING

IMPORTANT

F13

F12

BEFORE STORING THE BLOWER:

1. Drain a fuel tank and push the primer bulb until it

becomes empty of fuel.

2 .Remove the spark plug and drop a spoonful of 2-

cycle oil into the cylider. Crank the engine several

time and install the spark plug.

3. Store unit in a dry, dust free place, out of the reach

of children.

10. Storage

English

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 55 56

No comments

Redmax HBZ2601 User Manual Page 36