Redmax HBZ2601 User Manual download pdf (Page 34)

9. Maintenance

English

•Plug manufacturers recommend replacing the plug

twice a year to avoid unexpected plug failure in a

job.

REPLACEMENT PLUG IS A NGK CMR7H.

• Note that using any spark plugs other than those

designated may result in the engine failing to

operate properly or in the engine becoming

overheated and damaged.

• To install the spark plug, first turn the plug until it is

finger tight, then tighten it a quarter turn more with a

socket wrench.

■ MUFFLER

• Inspect periodically, the muffler for loose fasteners,

any damage or corrosion. If any sign of exhaust

leakage is found, do not use the blower and have it

repaired immediately.

• Note that failing to do so may result in the

engine catching on fire.

• Before starting operation, always make sure to

check if the muffler is properly held by three bolts to

the cylinder. (Fastening Torque : 70~110 kg·cm)

• Even if one bolt out of three bolts is loose, the

muffler may get loose during operation which may

result in engine catching on fire.

■ SPARK ARRESTER

• The muffler is equipped with a spark arrester to

prevent red hot carbon from flying out of the exhaust

outlet. Periodically inspect and clean as necessary

with a wire brush. In the State of California it is

required by law (Section 4442 of the California Pulic

Resources Code) to equip a spark arrester when a

gas powered tool is used in any forest covered, bush

covered, or grass covered unimproved land.

(1) Spark Arrester

IMPORTANT

WARNING

IMPORTANT

F11

F10

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 55 56

No comments

Redmax HBZ2601 User Manual Page 34