The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. WA
❲10❳• Gasoline is very flammable. Avoidsmoking or bringing any flame orsparks near fuel. Make sure to stop theengine and allow it cool beforerefueling
STARTING ENGINE1. Rest the unit on a flat, firm place. Keep thecutting head off the ground and clear ofsurrounding objects as it will start rotating
❲12❳Operation STOPPING ENGINE1. Release the throttle lever and run theengine for a half minute.2. Shift the ignition switch to the STOPposition.• Exc
METAL BLADE USAGE• Always cut by guiding the head from yourright to left.• When moving a wide area, start workingfrom the left side to avoid interfe
❲14❳Operationg. Cut only from your right to your left.h. Keep your path of advance clear ofmaterial that has been cut and otherdebris.3. How you can m
Maintenance• Always be sure to stop the engine beforeinspecting the brushcutter for problemsor performing maintenance.• Never alter the brushcutter or
❲16❳• Note that failing to do so may result inthe engine catching on fire. SPARK ARRESTER• The muffler is equipped with a sparkarrester to prevent re
• If waste gets stuck and causes blockagearound the intake air cooling vent orbetween the cylinder fins, it may cause theengine to overheat, and that
❲18❳Specifications BC2601DLOverall size(LxWxH)····················································· 71.7x12.4x13.2(in) / 1821x315x335(mm)Dry weight w
Parts List NOTE : 1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/orreplacement. 2. KOMATSU ZENOAH does not warrant
Read this manual carefully to understandall safety precautions, controls, properoperation and maintenance of yourRedMax brushcutters. Failure to do so
Parts List ❲20❳Fig.1 TRIMMER GROUP BC2601DL
Fig.1 TRIMMER GROUP BC2601DLKey# Description Part Number Q'ty1 PIPE-COMP T3002-12100 12 SHAFT 3520-12212 13 GEARCASE-ASS’Y T3002-13001 14 • GEARC
Fig.2 ENGINE GROUP BC2601DL❲22❳Parts List
❲23❳Fig.2 ENGINE GROUP BC2601DLKey# Description Part Number Q'ty1 CYLINDER 5911-12110 12 GASKET, base 5500-12212 13 BOLT 1850-12130 24 INSULATOR
THE CALIFORNIA AIR RESOURCES BOARD AND KOMATSU ZENOAH Co. ARE PLEASED TOEXPLAIN THE EMISSION CONTROL SYSTEM WARRANTY ON YOUR 1995 AND LATER LAWN ANDGA
EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE MODEL BC2601DL UNIT, KOMATSU ZENOAH AMERICA INC. (THE COMPANY), TH
KOMATSU ZENOAH AMERICA INC.4344 Shackleford Road Suite 500Norcross, Georgia 30093© Printed in Japan
CONTENTSSAFETY PRECAUTIONS... 4IN ORDER TO ENSURE PROPER AND SAFE OPERATION
❲4❳ In order to ensure proper and safeoperation of your brushcutter• Read this Owner/Operator Manualcarefully. Be sure you understand how tooperate th
Safety Precautions Work gear and clothing• When using your brushcutter, always besure to wear strong, durable, work clothing;shirts should be long-sl
❲6❳Safety Precautions Things to check before using yourbrushcutter• Before beginning work, look aroundcarefully to get a feel for the shape of thelan
Things to be careful about when usingyour brushcutter• When using your brushcutter, grip thehandles of the brushcutter firmly with bothhands, place
❲8❳Safety Precautions Notes on care and maintenance of yourbrushcutter• In order to maintain your brushcutter inproper working order, perform themain
MOUNTING ENGINE1. Loosen the bolts temporarily attached tothe clutch housing.2. Push the driveshaft toward the gearcaseand rotate it by hand to chec
Comments to this Manuals