RedMax EB7001RH Specifications download pdf (Page 38)

4. Service Guide

4-16 Cable Wiring

Switch Cord Wiring HB23 Series, HBZ26 Series

● Insert the grommet to align with the volute case

notch and clamp the cord between the protrusions

as shown in the figure at left.

Check that the cord on the module side is not

caught between volute case and crankcase.

● Pay attention that the cord is not caught against the

engine cover when it is installed.

Switch Cord Wiring EBZ30 Series

● Align the cord along the guide, and insert the

grommet to align with the volute case notch.

Check that the cord on the module side is not

caught between volute case and crankcase.

● Set the lead cords and clamp them as shown in the

figure at left.

Align the cord not to interfere with the clamp

mounting screw.

● Pay attention that the cord is not caught against the

engine cover when it is installed.

High Tension Cord Wiring EB4300/ 6200, EB70 Series, EBZ4800, EBZ51/ 71/ 80 Series

Insert the grommet to align with the crankcase's notch

and align the high tension cord and secure it with the

clamp as shown in the figure at left.

Align the high tension cord not to interfere

with the crankcase or the clamp mounting

screw.

CAUTION

Cords

Grommet

Cords

Grommet

Cord

Clamp

Crankcase

Clamp

Grommet

High Tension

Cord

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 65 66

No comments

RedMax EB7001RH Specifications Page 38