RedMax EB7001RH Specifications download pdf (Page 47)

4. Service Guide

Two stage dry element (Pre-filter + Paper filter) EBZ80 Series

Loosen the knob bolts then remove the element

(pre-filter + paper filter).

4-30 Element Cleaning

Element and pre-filter rinsing All Models

● Rinse the element carefully with warm water diluted

detergent or washing oil.

Confirm that no deformity, damage or

deterioration (if touched, element will

crumble) exists.

If necessary replace it with a new one.

● After rinsing it, tighten squeeze the element to

remove moisture.

● For a HB23 series and HBZ26 series element or a

EB70 series and EBZ71/ 80 series pre-filter, dry it

after rinsing and then install it.

Caution for element installation EB4300/ 6200, EBZ4800, EBZ51 Series

The half-wet urethane element should be moistened

with 2-cycle engine oil, softly squeezed, then installed.

・

・・

・ Excessive oil adhesion will cause filter

clogging.

・

・・

・ Never moisten pre-filter (EB70 series and

EBZ71/80 series) with engine oil.

If engine oil adheres to the filter, the paper

layer will not function.

Two stage dry paper filter cleaning EB70 Series, EBZ71/ 80 Series

Blow compressed air from inside/outside of the filter

along the filter element's pleats.

Never beat or hit the filter.

CAUTION

Cover

Pre-filter

Knob Bolts

Case

Paper Filter

Warm water diluted

detergent or washing oil

2-cycle engine oil

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 65 66

Comments to this Manuals

No comments

RedMax EB7001RH Specifications Page 47

Comments to this Manuals

Related products and manuals for Air blowers/dryers RedMax EB7001RH