RedMax EB7001RH Specifications download pdf (Page 25)

4. Service Guide

4-1 Starter Pulley Removal

HB23 Series, EBZ30 Series

● Insert the stopper (special tool) into the plug hole

(refer to “3 Special Tool”) to secure the piston.

● Remove the starter pulley using commercially

available pliers. The pulley must be covered with

cloth to prevent from damage.

Never remove the starter pulley by hitting

with a hammer.

Doing so may damage the pulley.

EB4300/ 6200, EB70 Series, EBZ4800, EBZ51 Series

● Insert the stopper (special tool) into the plug hole

(refer to “3 Special Tool”) to secure the piston.

● Remove nut (M10), set a commercially available

puller, then remove the starter pulley.

Never remove the starter pulley by hitting

with a hammer.

Doing so may damage the pulley.

4-2 Air Inlet Net Removal

EB6200, EB70 Series, EBZ4800, EBZ30/ 51/ 71/ 80 Series

The air inlet net is mounted by four clips.

The removal procedure is shown below.

1. Loosen each clip’s resin screw and remove the

whole.

Set the Philips screwdriver against the resin

screw securely. Insufficient or excessive

contact may cause the resin head to break.

2. Insert a screwdriver between free flow net and

frame, then wrench the clip open by twisting the

screwdriver.

Pay attention not to damage the air inlet net

or frame with the screwdriver.

CAUTION

Pliers

Cloth

Starter Pulley

Box Wrench

Nut (M10)

Starter Pulley

Puller

Starter Pulley

CAUTION

Resin Screw

【

【【

【Clip Position】

】】

】

Clip

ir Inlet Net

Screwdriver

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 65 66

Comments to this Manuals

No comments

RedMax EB7001RH Specifications Page 25

Comments to this Manuals

Related products and manuals for Air blowers/dryers RedMax EB7001RH