RedMax EB7000 Specifications download pdf (Page 14)

❲

14

❳

■ MUFFLER

• Inspect periodically, the muffler for loose

fasteners, any damage or corrosion. If any

sign of exhaust leakage is found, do not

use the blower and have it repaired

immediately.

• Note that failing to do so may result in

the engine catching on fire.

• Before starting operation, always make

sure to check if the muffler is properly held

by three bolts to the cylinder. (Fastening

Torque : 80~120kg·cm)

• Even if one bolt out of three bolts is loose,

the muffler may get loose during operation

which may result in engine catching on fire.

■ SPARK ARRESTER

• The muffler is equipped with a spark

arrester to prevent red hot carbon from

flying out of the exhaust outlet. Periodically

inspect and clean as necessary with a wire

brush. In the State of California it is

required by law (Section 4442 of the

California Public Resources Code) to equip

a spark arrester when a gas powered tool

is used in any forest covered, brush

covered, or grass covered unimproved

land.

IMPORTANT

WARNING

■ AIR INLET NET

• Blowing air is taken in from the air inlet net.

When air flow has dropped down during

operation, stop the engine and inspect the

air inlet net for blocking by obstacles.

• Note that failure to remove any such

obstacles may result in the engine

becoming overheated and damaged.

• Never use the blower without the net of

the blower. Before each use, check that

the net is attached in place and is free

from any damage.

WARNING

IMPORTANT

Maintenance

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments